ERG2SJ104

2W 功率金属氧化膜电阻器 ERG 2 S 系列，轴向### 电源氧化物电阻器，轴向 - 1-3WROX 系列电阻器有一层金属氧化膜，此膜附着在高质量的氧化铝模型上。 材料和处理的质量允许物理尺寸减小，以适合三种具有良好长期稳定性的功率额定值。 端盖和焊接线结构可确保高机械稳定性和高强度。 专门配制的涂层可保护组件不受环境条件的影响，并能经受过载条件而不受火焰损坏或机械损坏。 推荐在过载条件一定不会造成燃烧的所有应用下使用。 按照 IEC62 用四带式颜色代码标记电阻值和容差。 70°C 时的额定值，在大气中水平安装。 气候类别 55/235/56。

2W 功率金属氧化膜器 ERG 2 S 系列，轴向

欧时:
Panasonic ERG 系列 金属膜 金属膜电阻器 2W 100kΩ, ±5%, ±350ppm/°C

艾睿:
Do your through-hole printed circuit specifications require some resistance between components? Panasonic can offer you a cost-effective solution with their ERG-2SJ104 fixed single through-hole resistor. This dependable part has a power rating of 2 W. This product has a resistance value of 100K Ohm. Its temperature coefficient is ±350 ppm/°C. This product comes packaged in bulk, so the parts will be stored loosely. This device utilizes metal oxide technology. This product is 12 mm long. It has a tolerance of 5%. This part has an operating temperature of -55 to 200 °C. The ERG-2SJ104 part has an axial termination style.

Chip1Stop:
Res Metal Oxide 100K Ohm 5% 2W ±350ppm/℃ Conformal AXL Thru-Hole Bulk

Verical:
Res Metal Oxide Film 100K Ohm 5% 2W ±350ppm/C Conformal Coated AXL Bulk