FSBB20CH120DF

Motion SPM

is an advanced Motion SPM 3 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to the high-voltage, high-current drive signals required to properly drive the module"s internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

Features

---

 |

.

UL Certified No. E209204 UL1557

.

1200 V - 20 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection

.

Low-Loss, Short-Circuit Rated IGBTs

.

Very Low Thermal Resistance Using AlN DBC Substrate

.

Dedicated Vs Pins Simplify PCB Layout

.

Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing

.

Single-Grounded Power Supply

.

LVIC Temperature-Sensing Built-In for Temperature Monitoring

.

Isolation Rating: 2500 Vrms / 1 min.