R001

WIRELESSTHINGS R001 XRF Wireless UART Serial Data Module, Radio Transceiver, 868/915MHz, IEEE 802.15.4e, 2V-3.6V

The is a XRF Wireless UART Serial Data Module has been designed to be very easy to use, offer unmatched value, exceptionally high performance, long range and with high levels of security. It appears as transparent serial, what you send, is what you receive and all the error checking, encoding, packetisation, CRC"s are all done for you. It supports serial 2 wire serial updating for XRF firmware versions without a hardware programmer. The module can be loaded with personalities to turn it into a fully fledged wireless sensor. The module can be utilised as a combined 8051 micro and RF solution, this can be programmed using the free kick start version of IAR"s C compiler and some open source C compilers.

.

Build prototypes in minutes and hours, requires no complex programming

.

Fits the XBee style connector, so is often a drop in replacement

.

Whip antenna can be replaced with a straight or right angled

.

RP-SMA for easy connection to external antennas to achieve greater distances

.

128-bit AES encryption for high security

.

Ultra low sleeping power consumption 0.2ua makes battery powering a reality

.

Based on the Texas Instruments CC1110 combined 8051 micro and RF transceiver

.

Firmware upgradable by 2 wire serial

.

AT Commands to set firmware features

.

Familiar XBee sized layout for easy connection to many existing systems