TL16C452

具有并行端口但没有 FIFO 的双路 UART

The TL16C451 and provide single- and dual-channel respectively serial interfaces along with a single Centronix-type parallel-port interface. The serial interfaces provide a serial-to-parallel conversion for data received from a peripheral device or modem and a parallel-to-serial conversion for data transmitted by a CPU. The parallel interface provides a bidirectional parallel data port that fully conforms to the requirements for a Centronix-type printer interface. A CPU can read the status of the asynchronous communications element ACE interfaces at any point in the operation. The status includes the state of the modem signals CTS\, DSR\, RLSD\, and RI and any changes to these signals that have occurred since the last time they were read, the state of the transmitter and receiver including errors detected on received data, and printer status. The TL16C451 and TL16C452 provide control for modem signals RTS\ and DTR\\, interrupt enables, baud rate programming, and parallel-port control signals.

.

Integrates Most Communications Card Functions From the IBM PC/ATTM or Compatibles With Single- or Dual-Channel Serial Ports

.

TL16C451 Consists of One TL16C450 Plus Centronix Printer Interface

.

TL16C452 Consists of Two TL16C450s Plus a Centronix-Type Printer Interface

.

Fully Programmable Serial Interface Characteristics:

.

5-, 6-, 7-, or 8-Bit Characters

.

Even-, Odd-, or No-Parity Bit Generation and Detection

.

1-, 1 1/2-, or 2 Stop-Bit Generation

.

Programmable Baud Rate

dc to 256 kbit/s

.

Fully Double Buffered for Reliable

Asynchronous Operation

IBM PC/AT is a trademark of International Business Machines Corporation.