GELCAP-SL-2/0-3HOLEB10

TE Connectivity 凝胶盖 SL 街灯抽头接片连接套件 凝胶盖 SL 抽头接片连接套件用于在恶劣环境中安装、密封和保护高达 1000 V 的抽头接片连接。 这些凝胶盖 SL 接片的模制盖采用向下推动进行连接，然后夹子闭合，将盖固定到位。 盖中有可在电缆上施加压力的 PowerGel 密封凝胶，及具有防潮密封性的连接器，专门配制，用于 -40 至 +105°C 的高温环境。 PowerGel 还可用作震荡减震器且可拉出，从而可安全地再次安装到接头，无需切割工具。 该凝胶盖 SL 街灯抽头连接器接受三种电线，使其特别适用于街灯连接。 两个端口接受 14-2 /0 AWG 的电线，可用于馈电电缆，一个单端口接受 14-6 AWG 电线，它可用于为灯供电。 这些凝胶盖电动机连接接片的典型应用还包括电动机连接、灌溉系统、HVAC 和室外照明。 凝胶填料_接头和电线接头

** GelCap SL Street Light Stub Splice Connection Kit**

GelCap SL street light stub splice connection kits for insulating, sealing and protecting stub splice connections up to1000 V in harsh environments. The molded cover of these GelCap SL splices is pushed down over the connection and the clamp is then closed securing the cover in place. The PowerGel sealing gel which is already in the cap provides pressure on the cable and the connector creating a moisture seal which is specially formulated for use in high temperature environments of -40 to +105°C. The PowerGel also acts as a vibration damper and can be pulled away allowing safe re-entry to the connection without the need for cutting tools. The GelCap SL street light stub connector accepts three wires making it ideal for street light connections. Two ports accept wire from 14-2/0 AWG which can be used for the feeder cable and a single port accepts 14-6 AWG which is used to power the light. Typical applications for these GelCap motor connection splices also include motor connections, irrigation systems, HVAC and outdoor lighting.