CSD482410

Wall-Mount Type 4, 12 Enclosure Gray, 48.00x24.00x10.00, Steel

**APPLICATION**

CONCEPT™ Enclosures are ideal for machine control applications. With streamlined styling, flush quarter-turn Latch and an attractive, durable finish. Available in solid or window single-door and two-door landscape, flush-mount and sloped-top versions for application and mounting flexibility. Two-door landscape models provide full-width access and easy panel installation.

**SPECIFICATIONS**

* 14, 16 or 18 gauge steel see table

* Seams continuously welded and ground smooth

* Corner-formed doors

* Simple easy-to-remove and install hinge pins with built-in captivation clip

* High-torque threadless studs and fasteners on door

* Minimum-width body flange provides maximum door opening 210 degrees

* External formed body flange

* Panel mounting studs fit optional CONCEPT panels and other accessories

* Mounting holes in back of body for optional external wall-mount brackets

* Hidden hinges

* Doors are interchangeable and easily removed by pulling clipstyle hinge pins

* Seamless foam-in-place gasket

* Quarter-turn slotted latches

* Door alignment device on doors wider than 30 in.

* Four hinges on 60-in.-high enclosures

* Grounding stud on body; bonding provision on door except window-door models

* Provisions for thermoplastic data pocket right-hand hinged door on two-door models

* Hardware kit with panel mounting nuts, panel grounding hardware and sealing washers

* Single-door enclosures have a three-point latch system on enclosures where A is equal to or greater than 42-in. with quarter-turn, slotted latch

* Window-door enclosures have a clear polycarbonate window flush with door surface

* Mounting frame on flush-mount enclosures extends completely around enclosure

* Two-door enclosures have a overlapping door design which provides full-width access

* Two door enclosures have a three-point latch system on righthand hinged door furnished with flush slotted insert

* Illustrated instruction sheet

**FINISH**

Two standard finishes are available: ANSI 61 Gray or RAL 7035 textured light-Gray polyester powder paint inside and out.