AD80066KRSZRL

完整的16位CCD / CIS信号处理器 Complete 16-Bit CCD/CIS Signal Processor

Product Details

The AD80066 is a complete analog signal processor for imaging applications. It features a 4-channel architecture designed to sample and condition the outputs of linear charged coupled device CCD or contact image sensor CIS arrays. Each channel consists of an input clamp, correlated double sampler CDS, offset digital-to-analog converter DAC, and programmable gain amplifier PGA, multiplexed to a high performance 16-bit ADC. For maximum flexibility, the AD80066 can be configured as a 4-channel, 3-channel, 2-channel, or 1-channel device.

The CDS amplifiers can be disabled for use with sensors that do not require CDS, such as CIS and CMOS sensors.

The 16-bit digital output is multiplexed into an 8-bit output word, which is accessed using two read cycles. There is an optional single-byte output mode. The internal registers are programmed through a 3-wire serial interface and enable adjustment of the gain, offset, and operating mode. The AD80066 operates from a 5 V power supply, typically consumes 490 mW of power, and is packaged in a 28-lead SSOP.

**Applications**

.

Flatbed document scanners

.

Film scanners

.

Digital color copiers

.

Multifunction peripherals

### Features and Benefits

.

16-bit, 24 MSPS analog-to-digital converter ADC

.

4-channel operation up to 24 MHz 6 MHz/channel

.

3-channel operation up to 24 MHz 8 MHz/channel

.

Selectable input range: 3 V or 1.5 V peak-to-peak

.

Input clamp circuitry

.

Correlated double sampling

.

1×~6× programmable gain

.

±300 mV programmable offset

.

Internal voltage reference

.

Multiplexed byte-wide output

.

Optional single-byte output mode

.

See data sheet for additional features