电机驱动器/控制器, H桥, 1输出, 4 V至28 V电源, 12 A输出, NSOIC-16
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches.
Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The three dies are assembled in SO-16N package on electrically isolated leadframes.
Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level. The input signals INA and INB can directly interface the microcontroller to select the motor direction and the brake condition. A SEL0 pin is available to address the information available on the MultiSense to the microcontroller. The MultiSense pin allows to monitor the motor current by delivering a current proportional to the motor current value.
The PWM, up to 20 kHz, allows to control the speed of the motor in all possible conditions. In all cases, a low level state on the PWM pin turns off both the LSA and LSB switches.
**Key Features**
型号 | 品牌 | 下载 |
---|---|---|
VNH7100ASTR | ST Microelectronics 意法半导体 | 下载 |
VNH7013XP-E | ST Microelectronics 意法半导体 | 下载 |
VNH7013XPTR-E | ST Microelectronics 意法半导体 | 下载 |
VNH7070ASTR | ST Microelectronics 意法半导体 | 下载 |
VNH7070BASTR | ST Microelectronics 意法半导体 | 下载 |
VNH7040AYTR | ST Microelectronics 意法半导体 | 下载 |
VNH7100BASTR | ST Microelectronics 意法半导体 | 下载 |