IL4118

VISHAY  IL4118  光电耦合器, 三端双向可控硅输出, 过零, DIP, 6 引脚, 5.3 kV, 过零, 850 V

The is a 6-pin Phototriac Output Optocoupler consists of an AlGaAs IRLED optically coupled to a photosensitive zero crossing TRIAC network. The TRIAC consists of two inverse parallel connected monolithic SCRs. High input sensitivity is achieved by using an emitter follower phototransistor and a cascaded SCR predriver resulting in an LED trigger current of less than 1.3mA DC. It uses zero cross line voltage detection circuit which consists of two enhancement MOSFETs and a photodiode. The inhibit voltage of the network is determined by the enhancement voltage of the N-channel FET. The P-channel FET is enabled by a photocurrent source that permits the FET to conduct the main voltage to gate on the N-channel FET. Once the main voltage can enable the N-channel, it clamps the base of the phototransistor, disabling the first stage SCR predriver. It is suitable for solid state relay, temperature controls and solenoid/valve control.

.

Very low input current

.

300mA On-state current

.

10000V/µs High dV/dt

.

<10µA Very low leakage

.

6V Reverse voltage