34410 008500

连接线 #10 STR CSM 105C 600V

** EPDM Insulation Materials**

EPDM ethylene-propylene diene elastomeris a chemically cross-linked elastomer with excellent flexibility at high and low temperatures +150°C to -60°C. It has good insulation and dielectric strength, as well as excellent abrasion resistance and mechanical properties. EPDM also has better cut-through resistance than Silicone rubber, which it replaces in some applications. EPDM is compatible with most varnishes. Never before could you find many of the characteristics that are found in Silicone and Hypalon® combined into one insulation.

This insulation is chlorosulfonated polyethylene. Hypalon insulation has excellent heat resistance, color stability and electrical properties. Hypalon is recommended for motor leads for Class 130B insulation systems. It may be considered as an alternative to Silicone rubber to withstand 155°C varnish baking temperatures, but is not suitable for operating temperatures above Class 130B.

* UL AWM Style 3191 600 V, 105°C

* CSA Type CL1053

* Recommended Maximum Baking Cycles: 24 Hours @ 300°F 149°C