EKS-LM3S3748

LM3S3748 Microcontroller Evaluation Kit 50MHz CPU 64KB RAM 128KB Flash

The is a Stellaris LM3S3748 USB host/device evaluation kit with Keil RealView MDK-ARM, which is a compact and versatile evaluation platform for the Stellaris LM3S3748 ARM Cortex-M3 based microcontroller. The evaluation board design highlights the LM3S3748 microcontroller"s key features including a USB 2.0 full speed 12Mbps host/device controller, analog to digital Converter ADC, and serial interfaces. The LM3S3748 EVB has connectors for both embedded USB Host and USB Device operation, allowing a range of USB application options to be evaluated. In USB Device mode, a small switch selects between bus powered and self powered options. Four ADC signals are paired as two differential channels to implement a 1MS/s oscilloscope application on the LCD display. The oscilloscope feature set includes USB Host and Device connectivity as well as SD card support. The EVB may be used either as an evaluation platform or as a low cost in circuit debug interface ICDI.

.

50MHz Stellaris LM3S3748 microcontroller with 128KB flash and 64KB SRAM memory

.

Two channel oscilloscope quickstart application

.

USB host and device connectors

.

Bus powered or self powered USB device support

.

Simple setup USB cable provides serial communication, debugging, and power

.

Colour LCD graphics display with 128 x 128 pixel resolution

.

User LED and navigation switch with press to select functionality

.

USB interface for debugging and power supply

.

8R magnetic speaker with amplifier

.

Standard ARM 20 pin JTAG/SWD debug connector with input and output modes