ADUM5211CRSZ

ANALOG DEVICES  ADUM5211CRSZ  数字隔离器, 4通道, 15 ns, 3 V, 5.5 V, SSOP, 20 引脚

The ADUM5211 series dual-channel Digital Isolator with isoPower® an integrated isolated DC-to-DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC-to-DC converter provides regulated, isolated power that is adjustable between 3.15 and 5.25V. Input supply voltages can range from slightly below the required output to significantly higher. It eliminates the need for a separate, isolated DC-to-DC converter in low power, isolated designs. The iCoupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the DC-to-DC converter. The result is a small form factor, total isolation solution. isoPower uses high frequency switching elements to transfer power through its transformer. Take special care during printed circuit board PCB layout to meet emissions standards.

.

Dual DC-to-100Mbps NRZ signal isolation channels

.

Soft start power supply

.

Supports SPI up to 15MHz

.

>25kV/µs High common-mode transient immunity