LMH6639MA

TEXAS INSTRUMENTS  LMH6639MA  运算放大器, 单路, 90 MHz, 1个放大器, 200 V/µs, 3V 至 12V, SOIC, 8 引脚

The is a single voltage feedback Operational Amplifier with disable function and a rail-to-rail output drive capability of 110mA. Employing "s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common-mode voltage range extending to 0.2V below the V- and to within 1V of V+, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications. The LMH6639 offers a slew rate of 172V/µs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The TON value of 83ns combined with a settling time of 33ns makes this device ideally suited for multiplexing applications.

.

No output phase reversal with CMVR exceeded

.

Excellent overdrive recovery

.

Output voltage swing 40mV from rails

.

3.6mA Supply current no load

.

400µA Supply current off mode

.

0.186R Output resistance closed loop 1MHz

.

-0.2 to 4V Input common mode voltage

.

110mA Linear output current

.

-60dBc Total harmonic distortion

.

0.12% Differential gain

.

0.045° Differential phase