WIRELESSCOM/G10

MODULE, GSM / GPRS / CSD, RS232; SVHC: No SVHC 19-Dec-2012; Data Rate: 115.2bps; Supply Voltage Range: Not Available

WirelessCom/G10 is a device designed for communication with remote devices which have RS232 ports. RS232 interface is one of the industries leading standard. This interface can be found in a large variety of devices like, data loggers, POS terminals, vending machines, PLCs, control panels, various meters, switches, routers and the list goes on.  It is a frequent case when such devices are present in remote locations and there is a need to monitor/control/collect data. In such cases GSM network coupled with GPRS/CSD service can provide a very reliable wireless solution.   WirelessCom/G10 is ready-to-go solution for such situations. It acts as a transparent RS232 port. Thus you would be able to see your devices as directly connected to the computer, no matter how far you are from your devices.

.

Provides transparent GPRS/CSD connection

.

Receive SMS alerts when exceptions occur in device

.

No drivers required, hence works with any device/machine/equipment/computer

.

simple and informative configuration menu

.

Configurable through any terminal software

.

Hardware reset from DTR pin optional

.

Device is remotely configurable through GPRS/CSD/SMS

.

Access only through authorised phone numbers , Up to 5 configurable authorised phone numbers 

.

Auto PIN feature, no need to enter SIM card PIN after restart, Password protected configuration 

.

Supports various data formats, Firmware update possibility, CHAP/PAP authentication supported