MCP1612EV

MCP1612 DC to DC Converter and Switching Regulator Chip 0.8VDC/1.7VDC/2.4VDC/3.3VDC Output Evaluation Board

MCP1612 series DC/DC，步降 1，非隔离 输出评估板

得捷:
BOARD EVAL FOR MCP1612

e络盟:
The MCP1612 is a 1A, 1.4MHz, fully integrated buck regulator evaluation board. The output voltage is selectable from 0.8V to VIN by use of an external resistor divider. It is available in both the 8L MSOP and 8L DFN packages. The MCP1612 evaluation board output voltage is set to one of eight different preset values four per regulator circuit by use of a two position DIP switch. Each regulator circuit can supply an output current of 0A to 1A. the MCP1612 is a buck regulator, VOUT has to be lower than VIN. Therefore, it is recommended that VIN for CKT2 be greater than VOUT plus 500mV to 5.5V to ensure proper operation

艾睿:
MCP1612 DC to DC Converter and Switching Regulator Chip 0.8VDC/1.7VDC/2.4VDC/3.3VDC Output Evaluation Board

Allied Electronics:
MCP1612 Synchronous Buck Regulator Evaluation Board

安富利:
MCP1612 Synchronous Buck Regulator Evaluation Board

Chip1Stop:
MCP1612 SYNCHRONOUS BUCK REGULATOR EVALUATION BOARD