四路差动线路驱动器
The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI Standard EIA/A-422-B and ITU Recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26 mA, while typical propagation delay time is less than 10 ns.
High-impedance inputs maintain low input currents, less than 1 uA for a high level and less than 100 uA for a low level. Complementary output-enable inputs G and G\\ allow these devices to be enabled at either a high input level or low input level. The is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.
The SN75ALS192 is characterized for operation from 0°C to 70°C.
H = high level, L = low level, X = irrelevant, Z = high impedance off
型号 | 品牌 | 下载 |
---|---|---|
SN75ALS192 | TI 德州仪器 | 下载 |
SN75LVDS82 | TI 德州仪器 | 下载 |
SN75LVDS83B | TI 德州仪器 | 下载 |
SN75ALS126D | TI 德州仪器 | 下载 |
SN75240PW | TI 德州仪器 | 下载 |
SN75240PWG4 | TI 德州仪器 | 下载 |
SN75240P | TI 德州仪器 | 下载 |
SN75372D | TI 德州仪器 | 下载 |
SN75185DBR | TI 德州仪器 | 下载 |
SN754410NEG4 | TI 德州仪器 | 下载 |
SN75240PWR | TI 德州仪器 | 下载 |