MEE3S1205SC

Murata Isolated 3W Single Output DC/DC Converter - MEE3 SeriesMEE3 series isolated 3W single output DC/DC converters with an industry standard SIP package. These 3W single output isolated DC/DC converters have a high efficiency and power density and offer a full 3W load performance under a wide temperature range. Typical applications this MEE3 series of DC/DC converters include providing local supplies on control system boards with the added benefit of 1kVDC galvanic isolation.High efficiency of up to 89% typically High power density of 2.68W/cm3 Industry standard pinout Performance at full load at wide temperature range of -40°C to 85°C Fully encapsulated with toroidal magnetics No heatsink or external components required No electrolytic or tantalum capacitors UL 94V-0 package material ### 注MTBF to MIL-HDBK-217F FN2 with nominal input voltage at full load### 认可cULus### 标准UL 60950### Murata 电源解决方案 - SIP

Murata 隔离式 3W 单输出直流/直流转换器 - MEE3 系列

采用工业标准 SIP 封装的 MEE3 系列隔离式 3W 单输出直流/直流转换器。这些 3W 单输出隔离式直流/直流转换器效率出色、功率密度高，并可在广泛的温度范围内提供 3W 全负载性能。该 MEE3 系列直流/直流转换器的典型应用包括在控制系统板上提供本地电源，并具有额外的 1kVDC 电化隔离优势。

效率高达 89%（典型值）

高功率密度 2.68W/cm3

工业标准引脚输出

在 -40°C 至 85°C 的宽广温度范围内拥有出色的满载性能

完全封装，带环形磁铁

无需散热器或外部组件

无电解或钽电容器

包装采用 UL 94V-0 材料

### 注

当在标称输入电压下满载运行时，MFBF（平均故障间隔时间）符合 MIL-HDBK-217F FN2 标准

### 标准

UL 60950

### 认可

cULus

欧时:
DC/DC converter,12Vin,5Vout 600mA 3W

艾睿:
Provide the ability to switch between voltages by using this step down MEE3S1205SC DC to DC converter and switching regulator module. It has a voltage of 5 V. This part has a minimum operating temperature of -40 °C and a maximum of 85 °C. This device comes in tube packaging.

Chip1Stop:
Module DC-DC 1-OUT 5V 0.6A 3W 4-Pin SIP

Newark:
# MURATA POWER SOLUTIONS  MEE3S1205SC  Isolated Board Mount DC/DC Converter, 1kV Isolation, Fixed, 1 Output, 10.8 V, 13.2 V, 3 W, 5 V