LT1513CR

Battery Charger Lead-Acid/Li-Ion/NiCD/NiMH 2000mA 20V 8Pin7+Tab DDPAK

DESCRIPTION

The LT ®1513 is a 500kHz current mode switching regulator specially configured to create a constant- or programmable-current/constant-voltage battery charger. In addition to the usual voltage feedback node, it has a current sense feedback circuit for accurately controlling output current of a flyback or SEPIC Single-Ended Primary Inductance Converter topology charger. These topologies allow the current sense circuit to be ground referred and completely separated from the battery itself, simplifying battery switch ing and system grounding problems. In addition, these topologies allow charging even when the input voltage is lower than the battery voltage. The LT1513 can also drive a CCFL Royer converter with high efficiency in floating or grounded mode.

FEATURES

■ Charger Input Voltage May Be Higher, Equal to or Lower Than Battery Voltage

■ Charges Any Number of Cells Up to 20V

■ 1% Voltage Accuracy for Rechargeable Lithium Batteries

■ 100mV Current Sense Voltage for High Efficiency LT1513

■ 0mV Current Sense Voltage for Easy Current Programming LT1513-2

■ Battery Can Be Directly Grounded

■ 500kHz Switching Frequency Minimizes Inductor Size

■ Charging Current Easily Programmable or Shut Down

APPLICATIONS

■ Charging of NiCd, NiMH, Lead-Acid or Lithium Rechargeable Cells

■ Precision Current Limited Power Supply

■ Constant-Voltage/Constant-Current Supply

■ Transducer Excitation

■ Universal Input CCFL Driver