LP2997

DDR-II 终止稳压器

The linear regulator is designed to meet the JEDEC SSTL-18 specifications for termination of DDR-II memory. The device contains a high-speed operational amplifier to provide excellent response to load transients. The output stage prevents shoot through while delivering 500mA continuous current and transient peaks up to 900mA in the application as required for DDR-II SDRAM termination. The LP2997 also incorporates a VSENSE pin to provide superior load regulation and a VREF output as a reference for the chipset and DIMMs.

An additional feature found on the LP2997 is an active low shutdown SD pin that provides Suspend To RAM STR functionality. When SD is pulled low the VTT output will tri-state providing a high impedance output, but, VREF will remain active. A power savings advantage can be obtained in this mode through lower quiescent current.

.

Source and Sink Current

.

Low Output Voltage Offset

.

No External Resistors Required

.

Linear Topology

.

Suspend to Ram STR Functionality

.

Low External Component Count

.

Thermal Shutdown

.

Available in SOIC-8, SO PowerPAD-8 Packages

All trademarks are the property of their respective owners.