FTMH-105-03-L-DH

SAMTEC  FTMH-105-03-L-DH  板至板连接, 直角, FTMH系列, 10 触点, 针座, 1 mm, 表面安装　, 2 排

FTMH 系列微型端子束夹

的这些板对板 FTMH 系列表面安装微型管座节距为 1.0 mm，在 0.3 mm x 1.65 mm 的长支柱接触面采用 0.25μm 镀金，印刷电路板引线则采用表面无光泽锡。 此板对板 FTMH 系列表面安装 1.0 mm 节距微型管座的薄型高度仅为 1.79 mm。

绝缘体材料：黑色 LCP

工作温度：-55°C → 125°C

### 注

与 CLM 系列插座配用，请参见库存号 766-8732（典型）。

### 1.0mm Board to Board - Samtec

欧时:
Header 1mm PCB SMT horizontal 10way

得捷:
CONN HEADER SMD R/A 10POS 1MM

e络盟:
板至板连接, 直角, FTMH系列, 10 触点, 针座, 1 mm, 表面安装　, 2 排

艾睿:
Make strong and binding connections on your circuit boards by adopting this unshrouded FTMH-105-03-L-DH connector from Samtec. This HDR connector&s;s 10 contacts that are made out of phosphor bronze and plated with gold over nickel. It has a right angle body orientation. This is a 2-row connector. It has a header type gender. Its pitch is 1 mm. This device has a maximum current rating of 2.8 A/contact. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This product is 5 mm long, 3.17 mm tall and 8.14 mm deep. This connector has an operating temperature of -55 to 125 °C. FTMH-105-03-L-DH is housed in black liquid crystal polymer. It uses the solder termination method.

安富利:
Conn Unshrouded Header HDR 10 POS 1mm Solder RA SMD Tube

Chip1Stop:
Conn Unshrouded Header HDR 10 POS 1mm Solder RA SMD Tube

Newark:
# SAMTEC  FTMH-105-03-L-DH  Board-To-Board Connector, Right Angle, FTMH Series, Surface Mount, Header, 10, 1 mm