MC9S12DT128MPVE

MCU 16Bit S12 HCS12 CISC 128KB Flash 2.5V/5V 112Pin LQFP Tray

Overview

The MC9S12DT128 microcontroller unit MCU is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit HCS12 CPU, 128K bytes of Flash EEPROM, 8K bytes of RAM, 2K bytes of EEPROM, two asynchronous serial communications interfaces SCI, two serial peripheral interfaces SPI, an 8-channel IC/OC enhanced capture timer, two 8-channel, 10-bit analog-to-digital converters ADC, an 8-channel pulse-width modulator PWM, a digital Byte Data Link Controller BDLC, 29 discrete digital I/O channels Port A, Port B, Port K and Port E, 20 discrete digital I/O lines with interrupt and wakeup capability, three CAN 2.0 A, B software compatible modules MSCAN12, a Byteflight module and an Inter-IC Bus.

Features

• HCS12 Core

– 16-bit HCS12 CPU

i. Upward compatible with M68HC11 instruction set

ii. Interrupt stacking and programmer’s model identical to M68HC11

iii.20-bit ALU

iv. Instruction queue

v. Enhanced indexed addressing

– MEBI Multiplexed External Bus Interface

– MMC Module Mapping Control

– INT Interrupt control

– BKP Breakpoints

– BDM Background Debug Module

• CRG Clock and Reset Generator

– Choice of low current Colpitts oscillator or standard Pierce Oscillator

– PLL

– COP watchdog

– real time interrupt

– clock monitor

• 8-bit and 4-bit ports with interrupt functionality

– Digital filtering

– Programmable rising or falling edge trigger

• Memory

– 128K Flash EEPROM

– 2K byte EEPROM

– 8K byte RAM

• Two 8-channel Analog-to-Digital Converters

– 10-bit resolution

– External conversion trigger capability

• Three 1M bit per second, CAN 2.0 A, B software compatible modules

– Five receive and three transmit buffers

– Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8x8bi

– Four separate interrupt channels for Rx, Tx, error and wake-up

– Low-pass filter wake-up function

– Loop-back for self test operation

• Enhanced Capture Timer

– 16-bit main counter with 7-bit prescaler

– 8 programmable input capture or output compare channels

– Four 8-bit or two 16-bit pulse accumulators

• 8 PWM channels

– Programmable period and duty cycle

– 8-bit 8-channel or 16-bit 4-channel

– Separate control for each pulse width and duty cycle

– Center-aligned or left-aligned outputs

– Programmable clock select logic with a wide range of frequencies

– Fast emergency shutdown input

– Usable as interrupt inputs

• Serial interfaces

– Two asynchronous Serial Communications Interfaces SCI

– Two Synchronous Serial Peripheral Interface SPI

– Byteflight

• Byte Data Link Controller BDLC

• SAE J1850 Class B Data Communications Network Interface

– Compatible and ISO Compatible for Low-Speed <125 Kbps Serial Data Communications in

Automotive Applications

• Inter-IC Bus IIC

– Compatible with I2C Bus standard

– Multi-master operation

– Software programmable for one of 256 different serial clock frequencies

• 112-Pin LQFP and 80-Pin QFP package options

– I/O lines with 5V input and drive capability

– 5V A/D converter inputs

– Operation at 50MHz equivalent to 25MHz Bus Speed

– Development support

– Single-wire background debug™ mode

– On-chip hardware breakpoints