PCA9541APW/03

PCA9541APW/03概述

2比1的I2C总线主调节器具有中断逻辑和复位 2-to-1 I2C-bus master selector with interrupt logic and reset

General description

The PCA9541A is a 2-to-1 I2C-bus master selector designed for high reliability dual master I2C-bus applications where system operation is required, even when one master fails or the controller card is removed for maintenance. The two masters for example, primary and back-up are located on separate I2C-buses that connect to the same downstream I2C-bus slave devices. I2C-bus commands are sent by either I2C-bus master and are used to select one master at a time. Either master at any time can gain control of the slave devices if the other master is disabled or removed from the system. The failed master is isolated from the system and will not affect communication between the on-line master and the slave devices on the downstream I2C-bus.

Features

2-to-1 bidirectional master selector

I2C-bus interface logic; compatible with SMBus standards

PCA9541A/01 powers up with Channel 0 selected

PCA9541A/03 powers up with no channel selected and either master can take control of the bus

Active LOW interrupt input

2 active LOW interrupt outputs

Active LOW reset input

4 address pins allowing up to 16 devices on the I2C-bus

Channel selection via I2C-bus

Bus initialization/recovery function

Bus traffic sensor

Low Ronswitches

Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

No glitch on power-up

Supports hot insertion

Software identical for both masters

Low standby current

Operating power supply voltage range of 2.3 V to 5.5 V 6.0 V tolerant inputs

0 Hz to 400 kHz clock frequency

ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101

Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA

Packages offered: SO16, TSSOP16, HVQFN16

Applications

High reliability systems with dual masters

Gatekeeper multiplexer on long single bus

Bus initialization/recovery for slave devices without hardware reset

Allows masters without arbitration logic to share resources

PCA9541APW/03中文资料参数规格
封装参数

封装 TSSOP

外形尺寸

封装 TSSOP

其他

产品生命周期 Unknown

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

在线购买PCA9541APW/03
型号: PCA9541APW/03
制造商: NXP 恩智浦
描述:2比1的I2C总线主调节器具有中断逻辑和复位 2-to-1 I2C-bus master selector with interrupt logic and reset
替代型号PCA9541APW/03
型号/品牌 代替类型 替代型号对比

PCA9541APW/03

NXP 恩智浦

当前型号

当前型号

PCA9541APW/01

恩智浦

功能相似

PCA9541APW/03和PCA9541APW/01的区别

锐单商城 - 一站式电子元器件采购平台