TEXAS INSTRUMENTS TPS24750RUVT 芯片, 保险丝电路保护器, VQFN-36
The TPS2475x provide highly integrated load protection for 2.5 V to 18 V applications. The devices integrate a hot swap controller and a power MOSFET in a single package for small form factor applications. These devices protect source, load and internal MOSFET from potentially damaging events. During startup, load current and MOSFET power dissipation are limited to user-selected values. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when load is immediately disconnected from source.
Programmable FET SOA protection ensures the internal MOSFET operates within its safe operating area SOA at all times and the load starts up at a defined ramp rate. This enhances the internal MOSFET performance while improving system reliability. Power good, Fault, and current monitor outputs are provided for system status monitoring and downstream load control.
The devices are available in a 36-pin, 7-mm × 3.5-mm, QFN RUV package and fully specified over the –40°C to +125°C operating junction temperature.
电源电压DC 2.50V min
输入电压DC 18.0 V
供电电流 1 mA
通道数 1
针脚数 36
输出电流Max 12 A
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 2.5V ~ 18V
电源电压Max 18 V
电源电压Min 2.5 V
输入电压 18 V
安装方式 Surface Mount
引脚数 36
封装 VQFN-36
封装 VQFN-36
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Each
制造应用 通用
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2014/12/17
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TPS24750RUVT TI 德州仪器 | 当前型号 | 当前型号 |
TPS24750RUVR 德州仪器 | 完全替代 | TPS24750RUVT和TPS24750RUVR的区别 |