IR2166PBF 荧光灯控制器驱动器, 11.5 V, 16针 PDIP封装
Description
The IR2166 is a fully integrated, fully protected 600V ballast control IC designed to drive all types of fluorescent lamps. PFC circuitry operates in critical conduction mode and provides for high PF, low THD and DC Bus regulation. The IR2166 features in clude programmable preheat and run frequencies, programmable preheat time, programmable dead-time, programmable over-current protection, and programmable end of-life protection. Comprehensive protection features such as protection from failure of a lamp to strike, filament failures, end-of-life protection, DC bus undervoltage reset as well as an automatic restart function, have been included in the design. The IR2166 is available in both 16-lead PDIP and 16-lead narrow body SOIC packages.
Features
• PFC, Ballast control and half-bridge driver in one IC
• Critical conduction mode boost type PFC
• No PFC current sense resistor required
• Programmable preheat frequency
• Programmable preheat time
• Programmable run frequency
• Programmable over-current protection
• Programmable end-of-life protection
• Programmable dead time
• Internal ignition ramp
• Internal fault counter
• DC bus under-voltage reset
• Shutdown pin with hysteresis
• Internal 15.6V zener clamp diode on Vcc
• Micropower startup 150µA
• Latch immunity and ESD protection
• Parts also available LEAD-FREE
频率 39kHz ~ 50kHz
电源电压DC 10.0V min
输出接口数 2
输出电压 625 V
输出电流 400 mA
供电电流 10 mA
耗散功率 1800 mW
产品系列 IR2166
输出电流Max 500 mA
工作温度Max 125 ℃
工作温度Min -25 ℃
耗散功率Max 1800 mW
电源电压 10V ~ 17V
电源电压Max 25 V
电源电压Min 10 V
安装方式 Through Hole
引脚数 16
封装 DIP-16
封装 DIP-16
工作温度 -25℃ ~ 125℃
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC