MC100E116FNR2G

5V ECL昆特差动线路接收器 5V ECL Quint Differential Line Receiver

The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116, the E416 device may be of interest. Active current sources plus a deep collector feature of the MOSAIC III process provide the receivers with excellent common-mode noise rejection. Each receiver has a dedicated V supply lead, providing optimum symmetry and stability. If both inverting and non-inverting inputs are at an equal potential of > -2.5 V, the receiver does not go to a defined state, but rather current-shares in normal differential amplifier fashion, producing output voltage levels midway between HIGH and LOW, or the device may even oscillate. pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V The 100 Series contains temperature compensation.

Features

---

 |

.

500ps Max. Propagation Delay

.

VBB Supply Output

.

Dedicated VCCO Pin for Each Receiver

.

PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V

.

NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V

.

Output Qs will default low when inputs are < VCC -2.5 V

.

Internal Input Pulldown Resistors

.

Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

.

ESD Protection: > 2 KV HBM, > 200 V MM

.

Moisture Sensitivity Level 1

For Additional Information, see Application Note AND8003/D

.

Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34

.

Transistor Count = 98 devices

.

Pb-Free Packages are Available