MC10EP445

3.3V / 5V ECL 8位串行/并行转换器 3.3V/5V ECL 8−Bit Serial/Parallel Converter

The MC10/100EP445 is an integrated 8-bit differential serial to parallel data converter with frame asynchronous data resynchronization. The device is designed to operate for NRZ data rates of up to 5.0 Gb/s. The conversion sequence was chosen to convert the first serial bit to Q0, the second bit to Q1, etc. Two selectable differential serial inputs, which are selected by SINSEL, provide this device with loop-back testing capability. The MC10/100EP445 has a Sync pin which, when held high for at least two consecutive clock cycles, will swallow one bit of data shifting the start of the conversion data from D. Each additional shift requires an additional pulse to be applied to the Sync pin. Extra control pins are provided to reset and disable internal clock circuitry. Additionally, V pin is provided for single-ended input condition.The 100 Series contains temperature compensation.

Features

---

 |

.

1530 ps Propagation Delay

.

5.0 Gb/s Data Rate Capability

.

Differential Clock and Serial Inputs

.

VBB Output for Single-Ended Input Applications

.

Asynchronous Data Synchronization SYNC

.

Asynchronous Master Reset RESET

.

PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V

.

NECL Mode Operating Range: VCC = 0 V with VEE =-3.0 V to -5.5 V

.

Open Input Default State

.

CLK ENABLE Immune to Runt Pulse Generation

.

Pb-Free Packages are Available