DNC-T2610-020

Dust Collector Control; 100 to 240VAC; 50/60Hz; Expander Module

AMETEK NCC Dust Collector Controls offer sequential control of solenoid valves for pulse or shaker-damper cleaning of dust collectors. They are also used for display lighting, intermittent valve or sequential control. The control has two operating modes:

.

*Continuous Mode:** The pressure switch terminals are shorted. Upon application of input voltage, the control activates output #1 after the preset off time. It will continue to activate outputs sequentially until input voltage is removed **On Demand Mode:** The pressure switch terminals are connected to an isolated set of contacts of a differential pressure switch. The control will activate the outputs sequentially whenever the pressure switch contacts are closed. When the pressure switch contacts open, the output sequencing stops. Re-closing of the contacts will cause the control to resume activating the outputs. **Features:**

* Operating Voltage: 120 VAC

* Each Output: 200 VA Solid State TRIAC

* On-Time: Adjustable from 50 to 500 Milliseconds

* Operating Temperature: –40°C to +70°C