Microcontroller with LIN and H-Bridge MOSFET Driver
Description:
The is part of the part of the TLE986x product family. The TLE9867QXW20 is a single chip 2-Phase motor driver that integrates the industry standard ARM® Cortex™ M3 core, enabling the implementation of advanced motor control algorithms. It includes four fully integrated NFET drivers optimized to drive a 2-Phase motor via four external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behavior. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads.
It is a highly integrated
-
.
-
*AEC-Q100 Grade 0** automotive qualified device enabling cost and space efficient solutions for mechatronic DC motor drive applications such as sunroof and power window lift.
Summary of Features:
-
.
-
Four current programmable Drivers with charge pump for N-Channel MOSFET
-
.
-
Integrated LIN transceiver compatible with LIN 2.2 and SAEJ2602
-
.
-
Two Full duplex serial interface UART with LIN support
-
.
-
Two Synchronous serial channel SSC
-
.
-
On-chip OSC and PLL for clock generation
-
.
-
One high voltage monitoring input with wake up functionality
-
.
-
High speed Operational amplifier for motor current sensing via shunt
-
.
-
Measurement unit:
-
.
-
8-bit ADC module with 10 multiplexed inputs
-
.
-
10-bit ADC module with 8 multiplexed inputs, 5 external Analog inputs
-
.
-
On chip temperature and battery voltage measurement unit
-
.
-
Increased Temperature Shutdown supports operation up to Tjmax = 175 °C
-
.
-
Independent Programmable window watchdog
-
.
-
5V/1.5V Internal supplies
-
.
-
External Supply VDDEXT: 5V+/-2% @ 20mA
-
.
-
Power saving modes:
-
.
-
MCU slow-down Mode
-
.
-
Sleep Mode
-
.
-
Stop Mode
-
.
-
Cyclic wake-up Sleep Mode
Features of the Microcontroller:
-
.
-
32 bit ARM Cortex M3 Core, up to 24 MHz clock frequency
-
.
-
64KBytes flash memory for code and data
-
.
-
32 kByte Boot ROM memory in code space used for boot code and IP storage
-
.
-
Up to 6 kByte RAM memory
-
.
-
Harvard architecture
-
.
-
Thumb®-2 Instruction Set and hardware divide and multiplication unit
-
.
-
Four 16-Bit timers
-
.
-
Capture/compare unit for PWM signal generation CCU6 with 2 x 16-bits timers
General Characteristics:
-
.
-
Operating supply voltage Vs=5.5 to 28V, maximum rating 40V
-
.
-
Extended operating range Vs=3.0 to 28V, MCU / Flash fully functional
-
.
-
ESD performance :
-
.
-
up to 2kV / handling on all pins
-
.
-
4kV @ HV inputs
-
.
-
6kV @ LIN pin
-
.
-
Overvoltage device clamp load dump ruggedness up to 40V
-
.
-
**Wide** operating **temperature range**: Tj:-40°C up to **175°C**
Benefits:
-
.
-
Complete system-on-chip for DC motor control
-
.
-
Minimum number of external components reduce BOM cost
-
.
-
PG-VQFN package with 7 x 7mm footprint enable PCB space saving