C8051F020

8位微控制器 -MCU 16KB 12ADC

SYSTEM OVERVIEW

The /1/2/3 devices are fully integrated mixed-signal System-on-a-Chip MCUs with 64 digital I/O pins C8051F020/2 or 32 digital I/O pins C8051F021/3. Highlighted features are listed below; refer to Table 1.1 for specific product feature selection.

• High-Speed pipelined 8051-compatible CIP-51 microcontroller core up to 25 MIPS

• In-system, full-speed, non-intrusive debug interface on-chip

• True 12-bit C8051F020/1 or 10-bit C8051F022/3 100 ksps 8-channel ADC with PGA and analog multiplexer

• True 8-bit ADC 500 ksps 8-channel ADC with PGA and analog multiplexer

• Two 12-bit DACs with programmable update scheduling

• 64k bytes of in-system programmable FLASH memory

• 4352 4096 + 256 bytes of on-chip RAM

• External Data Memory Interface with 64k byte address space

• SPI, SMBus/I2C, and 2 UART serial interfaces implemented in hardware

• Five general purpose 16-bit Timers

• Programmable Counter/Timer Array with five capture/compare modules

• On-chip Watchdog Timer, VDD Monitor, and Temperature Sensor

ANALOG PERIPHERALS

\- SAR ADC

   • 12-Bit C8051F020/1

   • 10-Bit C8051F022/3

   • ± 1 LSB INL

   • Programmable Throughput up to 100 ksps

   • Up to 8 External Inputs; Programmable as Single-Ended or Differential

   • Programmable Amplifier Gain: 16, 8, 4, 2, 1, 0.5

   • Data-Dependent Windowed Interrupt Generator

   • Built-in Temperature Sensor ± 3°C

\- 8-bit ADC

   • Programmable Throughput up to 500 ksps

   • 8 External Inputs

   • Programmable Amplifier Gain: 4, 2, 1, 0.5

\- Two 12-bit DACs

   • Can Synchronize Outputs to Timers for Jitter-Free Wave form Generation

\- Two Analog Comparators

\- Voltage Reference

\- Precision VDD Monitor/Brown-Out Detector

ON-CHIP JTAG DEBUG & BOUNDARY SCAN

\- On-Chip Debug Circuitry Facilitates Full- Speed, Non Intrusive In-Circuit/In-System Debugging

\- Provides Breakpoints, Single-Stepping, Watchpoints, Stack Monitor; Inspect/Modify Memory and Registers

\- Superior Performance to Emulation Systems Using ICE Chips, Target Pods, and Sockets

\- IEEE1149.1 Compliant Boundary Scan

\- Low-Cost, Complete Development Kit

HIGH SPEED 8051 µC CORE

\- Pipelined Instruction Architecture; Executes 70% of Instruction Set in 1 or 2 System Clocks

\- Up to 25 MIPS Throughput with 25 MHz Clock

\- 22 Vectored Interrupt Sources

MEMORY

\- 4352 Bytes Internal Data RAM 4k + 256

\- 64k Bytes FLASH; In-System programmable in 512-byte Sectors

\- External 64k Byte Data Memory Interface programmable multiplexed or non-multiplexed modes

DIGITAL PERIPHERALS

\- 8 Byte-Wide Port I/O C8051F020/2; 5V tolerant

\- 4 Byte-Wide Port I/O C8051F021/3; 5V tolerant

\- Hardware SMBus™ I2C™ Compatible, SPI™, and Two UART Serial Ports Available Concurrently

\- Programmable 16-bit Counter/Timer Array with 5 Capture/Compare Modules

\- 5 General Purpose 16-bit Counter/Timers

\- Dedicated Watch-Dog Timer; Bi-directional Reset Pin

CLOCK SOURCES

\- Internal Programmable Oscillator: 2-to-16 MHz

\- External Oscillator: Crystal, RC, C, or Clock

\- Real-Time Clock Mode using Timer 3 or PCA

SUPPLY VOLTAGE .......................... 2.7V TO 3.6V

\- Typical Operating Current: 10 mA @ 20 MHz

\- Multiple Power Saving Sleep and Shutdown Modes

   100-Pin TQFP and 64-Pin TQFP Packages Available Temperature Range: -40°C to +85°C