C8051F060

SILICON LABS芯科/C8051F060

System Overview

The C8051F06x family of devices are fully integrated mixed-signal System-on-a-Chip MCUs with 59 digital I/O pins /2/4/6 or 24 digital I/O pins C8051F061/3/5/7, and two integrated 16-bit 1 Msps ADCs. Highlighted features are listed below; refer to Table 1.1 for specific product feature selection.

• High-Speed pipelined 8051-compatible CIP-51 microcontroller core up to 25 MIPS

• Two 16-bit 1 Msps ADCs with a Direct Memory Access controller

• Controller Area Network CAN 2.0B Controller with 32 message objects, each with its own indentifier mask C8051F060/1/2/3

• In-system, full-speed, non-intrusive debug interface on-chip

• 10-bit 200 ksps ADC with PGA and 8-channel analog multiplexer C8051F060/1/2/3

• Two 12-bit DACs with programmable update scheduling C8051F060/1/2/3

• 64 kB C8051F060/1/2/3/4/5 or 32 kB C8051F066/7 of in-system programmable Flash memory

• 4352 4096 + 256 bytes of on-chip RAM

• External Data Memory Interface with 64 kB direct address space C8051F060/2/4/6

• SPI, SMBus/I2C, and 2 UART serial interfaces implemented in hardware

• Five general purpose 16-bit Timers

• Programmable Counter/Timer Array with six capture/compare modules

• On-chip Watchdog Timer, VDD Monitor, and Temperature Sensor

Analog Peripherals

\- Two 16-Bit SAR ADCs

   • 16-bit resolution

   • ±0.75 LSB INL, guaranteed no missing codes

   • Programmable throughput up to 1 Msps

   • Operate as two single-ended or one differential con verter

   • Direct memory access; data stored in RAM without software overhead

   • Data-dependent windowed interrupt generator

\- 10-bit SAR ADC C8051F060/1/2/3

   • Programmable throughput up to 200 ksps

   • 8 external inputs, single-ended or differential

   • Built-in temperature sensor

\- Two 12-bit DACs C8051F060/1/2/3

   • Can synchronize outputs to timers for jitter-free wave form generation

\- Three Analog Comparators

   • Programmable hysteresis/response time

\- Voltage Reference

\- Precision VDD Monitor/Brown-Out Detector

On-Chip JTAG Debug & Boundary Scan

\- On-chip debug circuitry facilitates full-speed, nonintrusive in-circuit/in-system debugging

\- Provides breakpoints, single-stepping, watchpoints, stack monitor; inspect/modify memory and registers

\- Superior performance to emulation systems using ICE-chips, target pods, and sockets

\- IEEE1149.1 compliant boundary scan

\- Complete development kit

High Speed 8051 µC Core

\- Pipelined instruction architecture; executes 70% of instruction set in 1 or 2 system clocks

\- Up to 25 MIPS throughput with 25 MHz clock

\- Flexible Interrupt sources

Memory

\- 4352 Bytes internal data RAM 4 k + 256

\- 64 kB C8051F060/1/2/3/4/5, 32 kB C8051F066/7 Flash; In-system programmable in 512-byte sectors

\- External 64 kB data memory interface with multiplexed and non-multiplexed modes C8051F060/2/4/6

Digital Peripherals

\- 59 general purpose I/O pins C8051F060/2/4/6

\- 24 general purpose I/O pins C8051F061/3/5/7

\- Bosch Controller Area Network CAN 2.0B - C8051F060/1/2/3

\- Hardware SMBus™ I2C™ Compatible, SPI™, and two UART serial ports available concurrently

\- Programmable 16-bit counter/timer array with 6 capture/compare modules

\- 5 general purpose 16-bit counter/timers

\- Dedicated watchdog timer; bi-directional reset pin

Clock Sources

\- Internal calibrated precision oscillator: 24.5 MHz

\- External oscillator: Crystal, RC, C, or clock

   Supply Voltage .......................... 2.7 to 3.6 V

\- Multiple power saving sleep and shutdown modes

100-Pin and 64-Pin TQFP Packages Available Temperature Range: -40 to +85 °C