SN74ACT564DWR

八D型边沿触发触发器具有三态输出 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

元件 D 型 位 正边沿 20-SOIC（0.295"，7.50mm 宽）

得捷:
IC FF D-TYPE SNGL 8BIT 20SOIC

立创商城:
SN74ACT564DWR

德州仪器TI:
Octal D-Type Edge-Triggered Flip-Flops With 3-State Outputs

艾睿:
If you are looking for a simple device that can store state information, look no further than Texas Instruments&s; SN74ACT564DWR flip flop device. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment. This inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V. It has 8 channels per chip.

安富利:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R

Chip1Stop:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R

Verical:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC T/R

Newark:
# TEXAS INSTRUMENTS  SN74ACT564DWR  Flip-Flop, Tri State Inverted, Positive Edge, 74ACT564, D, 6.5 ns, 75 MHz, 24 mA, SOIC

Win Source:
IC FF D-TYPE SNGL 8BIT 20SOIC / Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC 0.295", 7.50mm Width