MC10SX1189

光纤通道同轴电缆驱动器和环路弹性电路 FIBRE CHANNEL COAXIAL CABLE DRIVER AND LOOP RESILIENCY CIRCUIT

The is a differential receiver, differential transmitterspecifically designed to drive coaxial cables. It incorporates the outputcable drive capability of the MC10EL89 Coaxial Cable Driver withadditional circuitry to multiplex the output cable drive source between thecable receiver or the local transmitter inputs. The multiplexer controlcircuitry is TTL compatible for ease of operation. The MC10SX1189 is useful as a bypass element for Fibre Channel-Arbitrated Loop FC-AL or Serial Storage Architecture SSA applications, to create loop style interconnects with fault tolerant, active switches at each device node. This device is particularly useful for back panel applications where small size is desirable. The EL89 style drive circuitry produces swings twice as large as a standard PECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize reflections. The 1.6V output swings allow for proper termination at both ends of the cable, while maintaining the required swing at the receiving end of the cable. Because of the larger output swings, the QT, QTbar outputs are terminated into the thevenin equivalent of 50? to V

Features

---

 |

.

425ps Propagation Delay

.

1.6V Output Swing on the Cable Driving Output

.

Single +5V operation

.

75kW Internal Input Pull-Down Resistors

.

>1000 Volt ESD Protection

.

Pb-Free Packages are Available