MCBSTM32UME

KEIL MCBSTM32UME Evaluation Board, ULinkme, Cortex-M3, ST Micro STM32F103RB MCU, Debug Interface Connectors

is a Keil MCBSTM32 evaluation board with ULINK-ME debug adapter which enables to create and test working programs based on the STM32 family of ARM Cortex-M3 processor based device. The prototyping area provides blocks for connecting the address and data lines, and ports. STM32F103 microcontroller provided with MCBSTM32 board is a high end STM32F10x device with on chip CAN and USB. A 8MHz oscillator provides the clock signal for the MCU. The JTAG interface connector provides debugging and emulator support for the STRM32F103 device. The JTAG interface allows application debugging and programming of on chip and off chip flash devices. Board also supports the Serial Wire Mode of Cortex-M3 based devices. Board connects the on chip serial UART to the ST3232, which converts the logic signals to RS232 voltage levels. The ULINK-ME connects your PC"s USB port to target system and allows to program and debug embedded programs on the target hardware.

.

72MHz STM32F103RB ARM Cortex-M3 processor based MCU in 64 pin LQFP

.

On chip memory: 128KB flash & 20KB RAM

.

USB 2.0 full speed device interface

.

CAN and UART interfaces

.

I2C, SPI and GPIO via PCB headers

.

Character LCD 16x2

.

Analog voltage control for ADC input

.

8 LEDs and 3 push buttons

.

Power via USB connector

.

20 pin ARM standard JTAG debug interface connector