MX7705EUE+

MAXIM INTEGRATED PRODUCTS  MX7705EUE+  模数转换器, 低功率, 16 bit, 500 SPS, 单, 2.7 V, 5.25 V, TSSOP

The is a 16bit, low power, 2-channel, sigma-delta analogue to digital converter ADC in 16 pin TSSOP package. This serial output ADC includes sigma-delta modulator with digital filter to achieve 16bit resolution with no missing codes. The operating supply current is 320µA with 3V supply and power down mode reduces supply current to 2µA. Self calibration and system calibration allow the MX7705 to correct for gain and offset errors. Excellent DC performance ±0.003% FSR INL and low noise 650nV make the MX7705 ideal for measuring low frequency signals with wide dynamic range. The device accepts fully differential bipolar/unipolar inputs. An internal input buffer allows for input signals with high source impedances. An on-chip digital filter with programmable cut-off and output data rate processes the output of sigma-delta modulator. It is used in strain gauge measurements, loop powered systems, flow and gas meters, pressure transducers, thermocouple and RTD measurements.

.

Supply voltage range is 2.7V to 5.25V

.

Operating temperature range from -40°C to 85°C

.

SPI/QSPI/MICROWIRE compatible 3-wire serial interface

.

Pin and software compatible with AD7705 device

.

On-chip input buffer and programmable gain amplifier PGA

.

0.5µV/°C unipolar offset drift and 0.5µV/°C bipolar zero drift 1 to 4 gain

.

Conversion rate of 0.5Ksps

.

Input CMRR of 130dB gain = 8 to 128, VDD = 5V and PSRR of 91dB gain = 8 to 128, VDD = 5V

.

PGA from 1 to 128 and 0.5ppm of FSR/°C gain drift