MC100LVEL40

3.3 / 5V ECL差分相位频率检测 3.3/5V ECL Differential Phase−Frequency Detector

The is a three state phase frequency-detector intended for phase-locked loop applications which require a minimum amount of phase and frequency difference at lock. Advanced design significantly reduces the dead zone of the detector. For proper operation, the input edge rate of the R and V inputs should be less than 5 ns. The device is designed to work with a 3.3 V power supply.When the reference R and the feedback FB inputs are unequal in frequency and/or phase the differential up U and down D outputs will provide pulse streams which when subtracted and integrated provide an error voltage for control of a VCO. pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V via a 0.01 5F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VFor application information, see AND8040/D, "Phase Lock Loop Operation."The 100 Series Contains Temperature Compensation

Features

---

 |

.

250MHz Typical Bandwidth

.

ESD Protection: >2 KV HBM

.

PECL Mode Operating Range: VCC = 3.0 V to 5.5 V

with VEE = 0 V

.

NECL Mode Operating Range: VCC = 0 V

with VEE = -3.0 V to -5.5 V

.

Internal Input Pulldown Resistors

.

Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

.

Flammability Rating: UL-94 code V-0 @ 1/8",

Oxygen Index 28 to 34

.

Transistor Count = 356 devices

.

Pb-Free Packages are Available