ISO7241A

四通道 3/1 1Mbps 数字隔离器

See the Product Notification section. The ISO7240A, and ISO7242A are quad-channel digital isolators with multiple channel configurations and output enable functions. These devices have logic input and output buffers separated by ’s silicon dioxide SiO2 isolation barrier. Used in conjunction with isolated power supplies, these devices block high voltage, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.

The ISO7240A has all four channels in the same direction while the ISO7241A has three channels the same direction and one channel in opposition. The ISO7242A has two channels in each direction.

The devices have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device.

A periodic update pulse is sent across the barrier to ensure the proper dc level of the output. If this dc-refresh pulse is not received, the input is assumed to be unpowered or not being actively driven, and the failsafe circuit drives the output to a logic high state. See ISO7240CF SLLS869 or contact TI for a logic low failsafe option.

These devices may be powered from either 3.3-V or 5-V supplies on either side in any 3.3-V / 3.3-V, 5-V / 5-V, 5-V / 3.3-V, or 3.3-V / 5-V combination. Note that the signal input pins are 5-V tolerant regardless of the voltage supply level being used.

These devices are characterized for operation over the ambient temperature range of –40°C to 125°C.

.

4000-Vpeak Isolation, 560-Vpeak VIORM

.

UL 1577 , IEC 60747-5-2 VDE 0884, Rev 2,

IEC 61010-1, IEC 60950-1 and CSA Approved

.

4 kV ESD Protection

.

Operate With 3.3-V or 5-V Supplies

.

Typical 25-Year Life at Rated Working Voltage

See Application Note SLLA197 and Figure 10

.

High Electromagnetic Immunity

See Application Report SLLA181

.

–40°C to 125°C Operating Range

.

APPLICATIONS

.

Industrial Fieldbus

.

Computer Peripheral Interface

.

Servo Control Interface

.

Data Acquisition