8位超低功耗微控制器,高达8 KB闪存多功能定时器,比较器, USART , SPI , I2C 8-bit ultralow power microcontroller with up to 8 Kbytes Flash multifunction timers, comparators, USART, SPI, I2C
The STM8L101x1 STM8L101x2 STM8L101x3 low-power family features the enhanced STM8 CPU core providing increased processing power up to 16 MIPS at 16 MHz while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.
The family includes an integrated debug module with a hardware interface SWIM which allows non-intrusive in-application debugging and ultrafast Flash programming.
All STM8L101xx microcontrollers feature low power low-voltage single-supply program Flash memory. The 8-Kbyte devices embed data EEPROM.
The STM8L101xx low power family is based on a generic set of state-of-the-art peripherals. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.
All STM8L low power products are based on the same architecture with the same memory mapping and a coherent pinout.
**Key Features**
-
.
-
Main microcontroller features
-
.
-
Supply voltage range 1.65 V to 3.6 V
-
.
-
Low power consumption Halt: 0.3 µA, Active-halt: 0.8 µA, Dynamic Run: 150 µA/MHz
-
.
-
STM8 Core with up to 16 CISC MIPS throughput
-
.
-
Temp. range: -40 to 85 °C and 125 °C
-
.
-
Memories
-
.
-
Up to 8 Kbytes of Flash program including up to 2 Kbytes of data EEPROM
-
.
-
Error correction code ECC
-
.
-
Flexible write and read protection modes
-
.
-
In-application and in-circuit programming
-
.
-
Data EEPROM capability
-
.
-
1.5 Kbytes of static RAM
-
.
-
Clock management
-
.
-
Internal 16 MHz RC with fast wakeup time typ. 4 µs
-
.
-
Internal low consumption 38 kHz RC driving both the IWDG and the AWU
-
.
-
Reset and supply management
-
.
-
Ultra-low power POR/PDR
-
.
-
Three low-power modes: Wait, Active-halt, Halt
-
.
-
Interrupt management
-
.
-
Nested interrupt controller with software priority control
-
.
-
Up to 29 external interrupt sources
-
.
-
I/Os
-
.
-
Up to 30 I/Os, all mappable on external interrupt vectors
-
.
-
I/Os with programmable input pull-ups, high sink/source capability and one LED driver infrared output
-
.
-
Peripherals
-
.
-
Two 16-bit general purpose timers TIM2 and TIM3 with up and down counter and 2 channels used as IC, OC, PWM
-
.
-
One 8-bit timer TIM4 with 7-bit prescaler
-
.
-
Infrared remote control IR
-
.
-
Independent watchdog
-
.
-
Auto-wakeup unit
-
.
-
Beeper timer with 1, 2 or 4 kHz frequencies
-
.
-
SPI synchronous serial interface
-
.
-
Fast I2C Multimaster/slave 400 kHz
-
.
-
USART with fractional baud rate generator
-
.
-
2 comparators with 4 inputs each
-
.
-
Development support
-
.
-
Hardware single wire interface module SWIM for fast on-chip programming and non intrusive debugging
-
.
-
In-circuit emulation ICE
-
.
-
96-bit unique ID